1.) Raw water is forced through the head of Ozone at the top of the tank. Ozone oxidizes minerals such as iron and manganese that are dissolved in water and converts them to solid particulates.
2.) The solid particles are filtered out as they move through the filter media.
3.) The IronKlear controller automatically initiates a regeneration based on the number of days or gallons used. During regeneration, the trapped mineral particles are flushed out.
4.) Ozone kills nuisance bacteria 1.5x better than chlorine injection systems
If you or your loved ones have experienced a metallic taste or an odor after drinking faucet water, those could be signs of too much iron in your drinking water. Solve this problem by letting us install an IronKlear filter at your property. Thanks to our expert knowledge of local water chemistry, we know exactly what products are needed to provide safe drinking water for your family.
After we’ve installed an IronKlear filter, take peace of mind knowing it provides guaranteed removal below the Environmental Protection Agency (EPA) standards for drinking water. Say goodbye to excess iron, manganese, iron bacteria, and sulphate bacteria as minerals are dissolved in the system and then filtered out.
While other iron filtering systems require hydrogen peroxide or chlorine injection, the IronKlear unit uses ozone, which is one and a half times stronger than chlorine and ten times stronger than the head of air used by other companies to oxidize iron and manganese. In addition to not using harmful chemicals, our system is safe for septic systems and costs less to operate.